News | About Us | Contact Us
EFU Fluorescent Factory Sealed LuminairesExplosion proof, Dust-Ignition proof.
UNILETS® for use with Threaded Metal Conduit Suitable for use in Wet Locations.
Available in two, three and four lamp fixtures, EFU fluorescent factory sealed luminaires are approved for use in paint spray booths and other classified hazardous locations.
- Classified areas such as inside paint spray booths, in pharmaceutical firms, paint-manufacturing plants, printing plants or any location where ignitable dust, fumes, gases, paint residue, paint powder or corrosive atmospheres may be present.
- Copperfree aluminum hood, housings and reflectors with epoxy finish; reflectors additionally have white baked enamel inside finish.
- Factory sealed unit – no external seals required.
- Easy installation.
- A wide range of ballasts and voltages are available for both domestic and export applications.
- Three hubs with two close-up plugs on each end of fixture provide for mounting straight down or at a 45° angle to either side.
- Explosion proof, impact-resistant and heat-resistant glass tubes protect lamps.
- Reflectors can easily be removed for replacement or cleaning using only a screwdriver.
- Supplied with Class P ballasts, equipped with an automatic thermally activated protective device, offering protection against excessive voltage, internal ballast short circuiting, inadequate lamp maintenance and improper fixture application.
- Non-sparking exterior surfaces for safer operation.
| AH260347 V AH260BU AH360347 V AH360BU AH460347 V AH460BU ARS232347 V ARS232BU |
ARS240347 V ARS240BU ARS332347 V ARS332BU ARS340347 V ARS340BU ARS432347 V ARS432BU |
ARS440347 V ARS440BU AVH210118 AVH210277 AVH210347 V AVH410118 AVH410277 AVH410347 V EFP248 |
Appleton’s ATX HRD Series tank inspection lights are designed to illuminate the inside of boilers, pipelines and other vessels that are normally closed. For use in hazardous areas where ignitable vapors, gases or highly combustible dusts are present.
Nutsteel’s NE400 and NE450 Series explosionproof floodlights are suitable for use in corrosive atmospheres, i.e. chemical and petrochemical plants. NE400: incandescent or mixed lamps; NE450: mercury vapor, metal halide or high pressure sodium lamps.
