News | About Us | Contact Us
Class I, Division 1 factory-sealed LED luminaire for general illumination
The EV LED is built to perform effectively and economically in areas that may be difficult to service, expensive to shut down, or any location requiring an increased degree of safety. Compared with conventional lighting, the EV LED consumes up to 85% less energy and typically lasts as long as 50,000 hours or more.
- Mounting Styles: Pendant Mount; Ceiling Mount; Wall Mount; Bulkhead Mount; Stanchion Mount
- Hub Sizes: 3/4"; 1"; 1 1/4"
- Wattages: 26W; 30W; 36W
- Voltages: 120-277V; 10-30 VDC
- Amperages: 0.30A; 0.36A; 2.8A
- Housing Material: Copper-free aluminum with Corro-free™ epoxy powder coat
- Globe Material: Heat- and impact-resistant glass
- Gasket Material: Silicone
- Instant illumination and restrike
- Better visibility with crisp, white light
- T6 temperature rating – safely operate in the most hazardous environments
- Cold temperature operation / no warm-up required
- Easy installation – compact modular fixture attaches onto existing Champ mounting module
- Energy-efficient – up to 85% reduction in energy used
- Provides up to 50,000 hours rated life – eliminates need for frequent lamp replacement
- Contains no mercury or other hazardous substances
- Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break – greatly reduces the risk of premature failure
- Operating ambient -30ºC to 55ºC (AC), -30ºC to 40ºC (DC)
- Dark sky compliant
NEC & CEC:
NEC:
- Class I, Division 1, Groups C, D
- T6 temperature rating at 55°C
- Class I, Zone 1 & 2, Group IIB
- Class II, Groups E, F, G
- Marine and wet locations, Type 4X, IP66
- UL Listed
- cUL Listed (certified by UL to CSA standards)
UL Standards:
- Class III, simultaneous presence
CSA Standard:
- 844 Electric Fixture Hangers for Hazardous Locations
- 1598 Luminaire
- 1598A Luminaire for Installation on Marine Vessels
- C22.2 No. 137
Appleton’s ATX HRD Series tank inspection lights are designed to illuminate the inside of boilers, pipelines and other vessels that are normally closed. For use in hazardous areas where ignitable vapors, gases or highly combustible dusts are present.
Nutsteel’s NE400 and NE450 Series explosionproof floodlights are suitable for use in corrosive atmospheres, i.e. chemical and petrochemical plants. NE400: incandescent or mixed lamps; NE450: mercury vapor, metal halide or high pressure sodium lamps.
