News  |  About Us  |  Contact Us

    Our Brands

    Hazard•Gard® EVM Series Explosionproof HID Luminaires

    Category: Lighting
    Brand: Crouse Hinds

    Hazard•Gard® EVM Luminaires are used in:

    • Heavy process industries where flammable or explosive vapors, gases or combustible dusts are present
    • Hazardous areas where long life and low maintenance costs are desired
    • Petroleum refineries, chemical, petrochemical and other heavy process industry facilities
    • Paint spray facilities
    • Hazardous locations requiring elevated ambient capability
    Product DetailsFeaturesCertifications
    • Luminaire Type: Pendant; Wall Bracket; Ceiling; Stanchion 25°
    • Hub Sizes: 3/4"; 1"; 1 1/4"
    • Wattages: 50-400 watts
    • Voltages: 120; 208; 240; 277; 347; 480; 600; multi-tap
    • Housing Material: Copper-free aluminum
    • Globe Material: Heat- and impact-resistant glass
    • Lamp Socket Material: Porcelain with stainless steel screw shell
    • Reflector Material: Dome and angle: Krydon® fiberglass-reinforced polyester; High bay: Alzak aluminum
    • Luminaire is factory wired; power is fed through "wireless" connection block which serves as a mechanical seal between conduit and ballast compartments, eliminating the need for an external, field installed seal; the result is fast, easy installation
    • Dome and 30° angle reflectors made of Krydon® material – won't rust, corrode, dent, chip or peel (order separately)
    • High bay reflectors of Alzak® aluminum for high wattage applications
    • Internally fluted glass globes reduce glare and provide comfortable viewing light
    • Wide range of light sources and wattages to meet specific lighting needs – 50-400W high pressure sodium (HPS); 70-400W metal halide (MH)
    • High power factor (90%+) ballasts reduce power costs – allow more luminaires per circuit
    • Four mounting arrangements to suit any lighting layout – pendant, ceiling, wall bracket and stanchion
    • Paint spray booth suitability on 50-100 watt luminaires provides efficient, economical H.I.D. lighting for areas where paint residue may accumulate on luminaires
    • Elevated ambient capability permits reliable operation at high ambient temperature; selected luminaires are suitable for ambient temperature up to 75°C
    • Integral ballasts – separate ballasts are not required; lowest installed cost
    • Factory sealed, porcelain, mogul base socket
    • NEC and CEC:
    1. Class I, Division 1, Groups B (with suffix GB), C, D
    2. Class I, Zone 1, Groups IIB + H2 (with suffix GB), IIB, IIA
    3. 100W max – Paint Spray Suitability
    4. 175W max – Class II, Class III
    • UL Standards:
    1. 844 Hazardous (Classified) Locations
    2. 1598 Luminaires
    3. 1598A Marine Locations
    • CSA Standard:
    1. C22.2 No. 137