News | About Us | Contact Us
Champ® VMV Series HID LuminairesChamp® VMV Luminaires are used:
- Mounting Styles: Pendant Mount; Flexible Pendant Mount; Ceiling Mount Thru Feed; Wall Mount Thru Feed; Quad-Mount; Stanchion Mount 25° Angle; Stanchion Mount Straight
- Hub Sizes: 3/4"; 1"; 1 1/2"
- Lamp Wattages: 50; 70; 100; 150
- Voltages: 120; 208; 240; 277; 347; 480; 600; Multi-tap (120, 208, 240, 277)
- Housing Material: Copper-free aluminum (less than 0.4 of 1%)
- Reflector Material: Krydon® fiberglass-reinforced polyester
- Globe Material: Heat- and impact-resistant internally fluted glass
- Refractor Material: Glass (50-175W); plastic (50-100W), for non-hazardous applications
- Compact, lightweight design is ideal for medium and low mounting heights
- Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy powder finish provide excellent resistance to corrosion
- Seven mounting arrangements to suit any lighting layout – pendant, flexible pendant, ceiling, wall bracket, angle stanchion, straight stanchion, and quad-mount
- Wide range of light sources and wattages to meet specifiers' needs: 50, 70, 100, and 150 watt high pressure sodium (HPS); 70, 100, 175 watt metal halide (MH and Pulse Start MH)
- Hinged ballast housing for ease of installation and maintenance
- Wide choice of photometric distributions; glass globes, refractors and compact refractors available for all wattage luminaires; plastic refractors (for non-hazardous applications only) for 50–100 watt luminaires
- All luminaires are designed to perform in a 40°C ambient temperature; selected luminaires are suitable for ambient temperatures up to 65°C
- Superior gasketing seals between the mounting module, housing, and optical assembly for optimum performance in wet and corrosive environments
- Hubs with an integral conduit stop and bushing to help prevent damage to field wiring during installation
- Low ambient capability to (-40°C)
- Dome and 30° angle reflectors made of bright white Krydon® material provide superior reflectivity, with twist-on feature requiring no tools or additional hardware; will not chip, peel, dent, rust, or corrode
- Grounding wire for safety
- High power factor ballasts (Min P.F. 90%) and available in a variety of voltages to meet local area requirements
- Mogul base porcelain lamp socket
NEC & CEC:
IEC:
- Class I, Division 2, Groups A, B, C, D
- HPS 50W, 70W – Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II)
- Class I, Zone 2
UL Standards:
- Zone 2 Ex nR IIC
CSA Standard:
- 844 Hazardous (Classified) Locations
- 1598 Luminaires
- 1598A Marine Locations
IEC Standard:
- C22.2 No. 137
- 60079-15
Appleton’s ATX HRD Series tank inspection lights are designed to illuminate the inside of boilers, pipelines and other vessels that are normally closed. For use in hazardous areas where ignitable vapors, gases or highly combustible dusts are present.
Nutsteel’s NE400 and NE450 Series explosionproof floodlights are suitable for use in corrosive atmospheres, i.e. chemical and petrochemical plants. NE400: incandescent or mixed lamps; NE450: mercury vapor, metal halide or high pressure sodium lamps.
