News | About Us | Contact Us
Champ® VMV High Wattage Luminaires are used:
- Mounting Styles: Pendant Mount (Rigid or Flexible); Ceiling Mount Thru Feed; Wall Mount Thru Feed; Quad-Mount; Stanchion Mount 25° Angle; Stanchion Mount Straight
- Hub Sizes: 3/4"; 1"; 1 1/2"
- Lamp Wattages: 200; 250; 320; 400
- Voltages: 120-600 Volts; Multi-tap
- Housing Material: Copper-free aluminum (less than 0.4 of 1%)
- Reflector & Reflector Lens Materials: Krydon® fiberglass-reinforced polyester (Reflector); Spun Alzak aluminum, tempered glass, stainless steel door frame (Reflector Lens)
- Globe Material: Heat- and impact-resistant internally fluted glass
- Refractor Material: Glass
- Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy powder finish provide excellent resistance to corrosion
- Six mounting arrangements to suit any lighting layout – pendant, ceiling, wall bracket, angle stanchion, straight stanchion and quad-mount
- Wide range of light sources and wattages to meet specifiers' needs: 200, 250, 400 watt high pressure sodium (HPS); 250 and 400 watt metal halide (MH) and pulse start metal halide
- Hinged ballast housing for ease of installation and maintenance
- Wide choice of photometric distributions; glass globes, glass refractors, and reflector/lens are available
- All luminaires designed to perform in a 40°C ambient temperature; selected luminaires are suitable for ambient temperatures up to 65°C
- Superior gasketing seals between the mounting module, housing, and optical assembly for optimum performance in wet and corrosive environments
- Hubs with integral conduit stop and bushing to help prevent damage to field wiring during installation
- Low ambient capability to (-40°C)
- Dome and 30° angle reflectors made of bright white Krydon® material and etched Alzak® high bay reflectors provide superior reflectivity
- Grounding wire for safety
- High power factor ballasts (Min. P. F. 90%) are available in a variety of voltages to meet local area requirements
- Mogul base lamp socket
NEC/CEC:
IEC:
- Class I, Division 2, Groups A, B, C, D
- With Glass Refractor - Class II, Class III & Simultaneous Presence
- (Class I, Division 2 and Class II)
- Class I, Zone 2
UL Standards:
- Zone 2 Ex nR IIC
CSA Standard:
- 844 Hazardous (Classified) Locations
- 1598 Luminaires
- 1598A Marine Locations
IEC Standard:
- C22.2 No. 137
- 60079-15
Appleton’s ATX HRD Series tank inspection lights are designed to illuminate the inside of boilers, pipelines and other vessels that are normally closed. For use in hazardous areas where ignitable vapors, gases or highly combustible dusts are present.
Nutsteel’s NE400 and NE450 Series explosionproof floodlights are suitable for use in corrosive atmospheres, i.e. chemical and petrochemical plants. NE400: incandescent or mixed lamps; NE450: mercury vapor, metal halide or high pressure sodium lamps.
