News | About Us | Contact Us
Pauluhn™ ProMax ECOS Marine/nm Linear Fluorescent LuminairesPauluhn™ ECOS Series Non-metallic Fluorescent Luminaires are used for mid and low bay lighting in non-hazardous or ordinary locations. Applications include:
- Lamp Lengths: 2 feet or 4 feet
- Lamp Types: T8; T5; T5HO
- Voltages: 120-277 VAC 50/60 Hz (standard); 347 VAC 60 Hz and 480 VAC 60 Hz (consult factory)
- Housing Material: Rugged fiberglass-reinforced polyester
- Lens Material: Polycarbonate injection molded
- Reflector Material: Engineered plastic designed for optimum reflectance
- Gasket Material: Silicone
- Lamp holder Material: Polycarbonate
- Impact-resistant housing - UV stabilized, fiberglass-reinforced polyester housing is impact-resistant and suitable to operate in ambient temperatures of -40°C to +65°C
- Optimized design - up to three gland entries at each end, suitable for dead-end, thru-feed or single-ended “T” wiring
- Retained gland plate - the retained gland plate is engineered plastic (standard) and is pre-drilled/threaded to order
- Photometrical reflector - engineered plastic reflector designed for optimum reflectance
- Removable lens - lens is removable at 120°, allowing for narrow gap mounting between obstructions
- UL1598A - Luminaire for Marine Vessels
- UL924 - Emergency Lighting Equipment
- NSF/ANSI 2-2007 Splash Zone
- Canadian Processed Product Registration C.R.C. c291
- ABS
Appleton’s ATX HRD Series tank inspection lights are designed to illuminate the inside of boilers, pipelines and other vessels that are normally closed. For use in hazardous areas where ignitable vapors, gases or highly combustible dusts are present.
Nutsteel’s NE400 and NE450 Series explosionproof floodlights are suitable for use in corrosive atmospheres, i.e. chemical and petrochemical plants. NE400: incandescent or mixed lamps; NE450: mercury vapor, metal halide or high pressure sodium lamps.
