News  |  About Us  |  Contact Us

    Our Brands

    Champ® FMV Series LED Floodlight Fixtures

    Category: Lighting
    Brand: Crouse Hinds

    The Champ® FMV LED Floodlight provides the same durability and reliability of a traditional Champ LED floodlight, coupled with the efficiency, low cost of ownership, and high performance of a Champ LED fixture. High-performance LEDs and a solid-state electronic driver provide light where you need it, at a fraction of the operating cost of HID technologies.

    FMV LED Series Floodlights are designed to provide full-spectrum, crisp, white light. Five versions of the Champ FMV LED are available, providing ideal solutions for a wide range of applications.

    Product DetailsFeaturesCertifications
    • Series: FMV5L; FMV7L; FMV9L; FMV11L; FMV13L
    • Voltage Range, VAC: 100-277V 50-60 Hz or 347/480V 60 Hz
    • Voltage Range, VDC: 108-250 VDC
    • Input Power (Nom.): 64W; 89W; 121W; 149W; 179W
    • Input Amps (Max.): 0.550; 0.800; 1.083; 1.608
    • Power Factor: >0.85
    • Housing Material: Copper-free aluminum with Corro-free™ epoxy powder coat
    • Lens Material: Shatter-resistant glass
    • Instant illumination and restrike
    • Better visibility with crisp, white light
    • Minimum T4 temperature rating – safely operate in the most hazardous environments and any non-hazardous location
    • Cold temperature operation / no warm-up required
    • “No lights out” feature – if a single LED fails, others will remain lit from other drivers – minimum 50% output maintained
    • Terminals – 3 x 6 sq. mm. for IEC version
    • Easy installation – compact modular fixture attaches onto existing SFA6 and SWB6
    • Energy-efficient technology – use up to ½ the power of standard HID luminaires
    • Provides up to 60,000 hours rated life – eliminates need for frequent lamp replacement
    • Contains no mercury or other hazardous substances
    • Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break – greatly reduces the risk of premature failure
    • Operating ambient -40ºC to 55ºC
    • Dark sky friendly with optional visor
    • DesignLights Consortium® approved for select models (refer to Ordering Information for details)
    NEC and CEC:
    • Class I, Division 2, Groups A, B, C, D
    • Class I, Zone 2
    • Class II, Groups E, F, G
    • Class III
    • Simultaneous Presence
    • Wet Locations, Type 4X, IP66
    UL Standards:
    • UL844
    • UL1598 Luminaires, UL1598A Marine
    CSA Standard:
    • CSA C22.2 No. 137
    • IECEx UL 11.0054X
    • Ex nA nR IIC T4 Gc Tamb -30°C to +55°C
    • Ex nA nR IIC T5 Gc Tamb -30°C to +40°C
    • Ex tc IIIC T68°C Dc IP66 Tamb -30°C to 40°C
    • DEMKO 12 ATEX 115535X
    • Ex II 3 G Ex nA nR IIC T4 Gc Tamb -30°C to +55°C
    • Ex II 3 G Ex nA nR IIC T5 Gc Tamb -30°C to +40°C
    • Ex II 3 D Ex tc IIIC T68°C Dc IP66 Tamb -30°C to +40°C
    • CEPEL Ex-1956/10