• 16 A:

1. Flameproof seal with cylindrical spigot joint.
2. Automatic disconnection of the poles by patented dual-safety device, which ensures the following once the plug is removed from the socket outlet.
3. Automatic and simultaneous disconnection of each phase in a flameproof chamber.
4. Disconnection, once power is off, of the pins in the second flameproof chamber.
5. Cover can be padlocked.
6. Wall sockets and flush sockets incorporate a safety device that only accepts ATX plugs.
7. ATX plugs can be used with IEC 60309-2 compliant industrial pin socket outlets in non-hazardous areas.

• 32 A:

1. Flameproof seal with cylindrical spigot joint.
2. Mechanical interlocking device ensures.
3. Disconnection takes place within the flameproof chamber before the plug is removed from the socket outlet.
4. The plug cannot be removed when energized.
5. Straight handle placed on the plug for use with IEC 60309-2 compliant industrial pin socket outlets in non-hazardous areas.

• 80 A and 125 A:

1. Interlocking mechanical device which prevents.
2. The switch from closing until the plug is fully inserted into the wall socket.
3. The plug from being removed until the switch is off.
4. Socket outlet supplied with a load break isolating switch, ensuring disconnection with power on.
5. Switch handle can be padlocked in the “off” position (3 padlocks).
6. Wall Sockets.

• 16 A:

1. Gray painted marine grade aluminum alloy.
2. 2 x M20 threaded cable entries (1 at the top, 1 at bottom).
3. Supplied with one M20 plug.
4. Connection on 2 x 4 mm2 terminals.
5. Earth terminals: internal and external, with 4 mm diameter screws.

• 32 A:

1. Gray painted marine grade aluminum alloy body and.
2. Cast iron flush socket.
3. 2 x M25 threaded cable entries (1 at the top, 1 at bottom).
4. Supplied with one M25 plug.
5. Connection on 10 mm2 terminals.
6. Earth terminals: internal and external with 6 mm diameter screws.

• 80 A:

1. Gray painted cast iron with marine anti-corrosion treatment.
2. 1 x M32 threaded cable entry (on the top side).
3. Connection via 8 mm diameter lug terminals (not supplied).
4. Internal earth through 35 mm2 connection and external earth through 6 mm diameter screws.

• 125 A:

1. Gray painted cast iron with marine anti-corrosion treatment.
2. 1 x M50 threaded entry (on the top side).
3. Connection via 8 mm diameter lug terminals (not supplied).
4. Internal earth through 35 mm2 connection and external earth through 6 mm diameter screws.
5. Plugs.
6. All plugs: gray painted marine grade aluminum alloy.

• 16 A:

1. 1 cable entry through integrated M25 cable gland.
2. 9 to 12 mm diameter for the 2P+E plug.
3. 12 to 15 mm diameter for the 3P+E plug.
4. 15 to 17mm diameter for the 3P+N+E plug.
5. Connection on 2.5 mm2 maximum terminals.

• 32 A:

1. 1 cable entry via integrated cable gland diameter 17 to 22 mm.
2. Connection on 6 mm2 maximum terminals.

• 80 A:

1. 1 cable entry via supplied cable gland diameter 18 to 28 mm.
2. Connection on 16 mm2 maximum terminals.

• 125 A:

1. 1 cable entry via supplied cable gland diameter 30 to 36 mm.
2. Connection on 35 mm2 maximum terminals.